What's New

Photo
TUF-TOP Premium Quality Cleaner and Stripper for wood is a highly concentrated, biodegradable cleaner for
wood and composite docks, decks, fences and other wood structures. PQC removes graying, dead wood fibers,
mold, mildew, and algae. PQC leaves the wood bright, clean and ready to stain.
Photo
Timber-Top Wood Stain and Finish is a premium quality Fluoro Acrylic Polymer coating for wood decks, docks and siding. Timber-Top chemically and mechanically bonds to and into the wood, providing a tough, durable water-repellent finish that enhances the natural appearance of the wood. Florida formulated to withstand the most severe ultra-violet environments. Available in 8 tintable colors.
Photo
TUF-TOP DURAPLATE CW is a single component, high gloss low V.O.C. acrylic clear coating. Based on Nano Technology, DURAPLATE CW demonstrates outstanding adhesion to a wide range of substrates including most coatings. DURAPLATE CW incorporates a chemical curing mechanism that achieves fast initial water resistance and curing, and continues to harden and cure for seven to ten days after application to provide a harder, tougher finish than conventional water-based coatings and even most solvent=based sealers. DURAPLATE CW may be tinted with up to 2 fl.oz. per gallon universal tints to achieve a mottled or translucent color effect over bare concrete or comparable coatings.
Photo

Deco Chips are a through colored vinyl chip texturing agent designed for use as a decorative topping for the Tuf-Top WT-113 Waterbased Epoxy. Available in four blended colors, deco chips can mimic the look of terrazzo and stone surfaces on floors, counter tops and most interior surfaces.


Photo
Paver Tone Color Toning Additive when blended with Tuf-Top paver sealers will restore color consistency and vibrancy to faded, stained and unattractive pavers, spray deck, and stucco. Paver Tone is color toning additive for Tuf-Top solvent paver and clear sealers
Photo
TUF-TOP HOLD-OUT is a water based liquid that will render water repellency to most concrete and masonry. Hold-Out penetrates and chemically reacts on and below the surface to form a "breathable" barrier that will retard moister intrusion, and inhibit mildew, mold and algae formation without the use of toxic biocides.
Logon